What are the regular checks to be aware of when using an automated plug-in?
2019-10-28
Before installing the blade, please carefully clean the dust, chips and other debris on the mounting surface of the rotary bearing of the cutting machine to keep the bearing mounting surface and the cutting machine clean. In the first step, the blade is carefully and smoothly placed on the mounting surface of the bearing, and the bearing of the cutting machine is rotated by hand to automatically find the alignment with the center of the blade. In the second step, the pressing knife block is mounted on the cutting machine blade and the bolt holes are aligned with the bolt holes on the foot cutting machine bearing. In the third step, install the hexagon socket head bolts and tighten the screws with the Allen key to securely mount the blade on the bearing. The fourth step, self-test: after the blade is installed, there should be no looseness and skewness. Although there is not much problem after these are done, the safety protection facilities must be confirmed that there will be no accidents. Of course, even then, the speed of the operation should be limited to 4,500 rpm, and the accident will occur. After the preliminary work is completed, it must be tested for a period of time before the operation, and the normal use of the machine can ensure the safe operation of the blade. During the cutting process, please push the board to be cut evenly, and avoid pushing the board too quickly and quickly. When the circuit board collides with the blade sharply, it will cause blade damage (collision, cracking) and even serious safety accidents. When the blade is stored, the body should be kept clean and clean. No stains, spots, dust and other debris are allowed on the knife. The edge of the blade should be covered with a PVC hose at least one turn and sealed with sealing tape.
These measures can guarantee the work output and quality, so a good blade is definitely the core part of the automatic plug-in machine. It can be said that the work efficiency of the automatic plug-in machine depends entirely on the quality of the blade.
