Kuwasiliana na Wasambazaji? Mtoa huduma
Nicolas Mr. Nicolas
Naweza kukusaidia vipi?
Msaidizi wa Mawasiliano
 Simu:86-0755-13828824221 Barua pepe:1650259446@qq.com
Home > Bidhaa > Mashine ya Kuingiza Panasonic > Mashine ya Kuingiza ya Kuingiza ya Panasonic lead RL131
Mashine ya Kuingiza ya Kuingiza ya Panasonic lead RL131
  • Mashine ya Kuingiza ya Kuingiza ya Panasonic lead RL131

Mashine ya Kuingiza ya Kuingiza ya Panasonic lead RL131

    Aina ya malipo: T/T
    Incoterm: FOB,CIF,EXW
    Min. Amri: 1 Bag/Bags
    Muda wa Utoaji: 7 Siku

Maelezo ya Msingi

Mfano wa Mfano.: NM-EJR1A, NM-EJR2A

Additional Info

Ufungaji: Ufungashaji wa utupu katika kesi za mbao

Brand: Panasonic

Usafiri: Ocean

Mahali ya Mwanzo: Japan

Bandari: Hong Kong

Maelezo ya bidhaa

Vipengele

RL131 ni mashine ya kuingiza sehemu ya radial na mfumo wa pini ya mwongozo wenye uwezo wa kuingiza kwa kasi kubwa saa

wakati wa busara wa sehemu ya 0.17 s /, ambayo pia husababisha kuokoa nishati na kelele ya operesheni iliyopunguzwa.

Kuingiza kwa kasi kubwa na ya juu

Kuingiza kwa kasi ya juu kwa wakati wa juu wa nambari ya 0.17 s / sehemu inaruhusu kuingizwa kwa wiani wa juu.

Kiwango cha Operesheni kilichoboreshwa

Sehemu ya kulisha ya sehemu hutoa vifaa bila kuzuia mashine ambayo inaruhusu muda mrefu

operesheni ya saa.

Kazi ya urejeshaji usambazaji wa kiotomatiki na huduma za programu pia zinachangia operesheni ya saa zaidi ya

mashine.

Kuegemea juu

Nafasi za kuingiza husahihishwa kwa msingi wa kukabiliana na kupatikana kwa utambuzi wa kuona wa mashimo ya kuingiza

Bodi ya PC, kuhakikisha kuingizwa kwa kuaminika sana.


Maelezo ya Mashine

Item

Details

Power supply

= Rated voltage

 

= Frequency

= Rated capacity

3-phase 200 / 220 V ± 10 V selectable

380 / 400 / 420 / 480 V ±20 V selectable

50 / 60 Hz

Approx. 3.5kVA

Air supply

= Supplied air pressure Min. 0.45 MPa to Max. 0.8 MPa

(Operation air pressure: 0.45 ~ 0.5 MPa)

= Supplied air mass Approx. 80 L / min. (A.N.R)

Note: Quick coupler attached (SMC KK13P-03M, KK13S-03F).

Dimensions

= NM-EJR1A

 

= NM-EJR2A

W3,200 ´ D2,417 ´ H1,575 mm

(Not including signal tower) W3,200 ´ D2,417 ´ H1,575 mm

(Not including signal tower)

Mass

= NM-EJR1A

= NM-EJR2A

Approx. 2,250 kg (main body only)

Approx. 2,350 kg (main body only)

Environmental requirements

= Ambient temperature 20°C ± 10°C

Operating controls

= Interactive operation via color LCD touch screen (Front and Rear: Standard equipment)

English/Japanese/Chinese selectable with a single button Recognition screen (displays the recognized board image on a superimposed window)

Hierarchical menu (Operator/Engineer)

= I/O functions 3.5-inch FDD and SD card slot (standard equipment)

= Communication RS-232C

Coating color

= Standard color

White: W-13 (G50)

Msingi Utendaji

Item

Details

Insertion tact time

= Max. tact time: Approx. 0.17 s/point (0.20, 0.25, 0.36, 0.45 s/point changeable)

0.25 s/point conditions

=REMARKS=

*1 X-Y table movement at the tact time of 0.17 s/point: Within 35 mm Insertion direction: 0°, 90°, -90° (180°: 0.36 s/point)

*2 The tact time above is enabled only when components are continuously taped. (Tact time varies if there are missing portions.)

*3 Tact time varies between the beginning and the last of the insertion.

*4 Tact time varies when new components are inserted for recovery.

*5 Tact time varies also if 10 or more feeders are operated at a time due to the NC data setting.

*6 Tact time must be set between 0.25 and 0.45 s when inserting components more than 12 mm in diameter or more than 18 mm in height

Applicable components

Insertion pitch: 2.5 and 5.0 mm Height: Hn = Max. 21 mm Diameter: D = Max. 13 mm

Resistors, electrolytic capacitors, ceramic capacitors, LEDs, transistors, filters and resistor networks

Component packaging

= Taping (in pack or reel)

=REMARKS=

Component pack must be lower than 360 mm and width less than 62 mm. Component reel must be up to 360 mm in diameter and 62 mm in width. Bracket and reel shaft are required. Cannot be used on the upper stage of

the supply unit.

PCB replacement time

= Approx. 2 s to 4 s (Ambient temperature: 20°C):

=REMARKS=

PCB replacement time only includes time for loading. It takes approx. 4 to 5 seconds including the table return time.

Applicable PCB

= Demensions

Min. 50 ´ 50 mm to Max. 508 ´ 381 mm

Width-to-length ratio: Width should be equal to or less than length. Consult us for boards having width longer than length.

= Allowable insertion area

Min. 50 ´ 40 mm ~ Max. 508 ´ 371 mm

= Thickness

1.6 mm ± 0.15 mm (for standard specification)

=REMARKS=

Boards of thickness from 0.6 mm (min.) to 2.0 mm (max.) are applicable. Even if the board thickness is within the above range, clinched angle of the inserted lead or lead length may vary, or board transfer error may occur depending on the shapes of board or insertion holes. Please contact us in advance.

 

= Mass

Max. 1 kg per board including inserted components.

= Flow direction

Right to left (Standard) or Left to right

= Board positioning method

Pin positioning (Standard, without positioning in the Y direction),

=REMARKS=

Contact us separately for edge positioning.

Insertion pitch

= 2-pitch specification

2.5 mm and 5.0 mm, or 2.54 mm and 5.08 mm

Insertion direction

= 4 directions (0°, 90°, 180° and -90°)

Anvil

= Cutting & Clinch type system (Piezoelectric detection system)

No. of component inputs

= NM-EJR3A

40 types

= NM-EJR4A

80 types

Rl131 2

Shenzhen Keith Electronic Equipment Co, Ltd "iko katika Wilaya ya Baoan, Shenzhen. Ni muuzaji wa vifaa vya AI na SMT, vipuri, vinywaji na vifaa vya matumizi vya kusaidia nchini China. Kwa miaka mingi, tumetoa vifaa vya juu na sehemu kwa wateja wetu ili kuhakikisha huduma ya hali ya juu. Na kwa soko la kuuza nje, tunapanga kuendeleza Ulaya, Amerika ya Kaskazini, Amerika Kusini, Asia ya Kusini, India na mahali panapohitajika vifaa vya vifaa vya SMT.
Falsafa ya biashara: ushirikiano, kushinda-kushinda, uvumbuzi, msaada wa pande zote
Tumekuwa tukiandamana na dhana ya usimamizi wa chapa ya "kuzingatia ubora wa bidhaa na mahitaji ya wateja", kupitia utekelezaji wa uvumbuzi wazi, usimamizi bora wa operesheni, maendeleo ya rasilimali watu na mikakati mingine, ili kujenga kikamilifu ushindani wa msingi wa kampuni, kuunda wateja na maadili ya kijamii, na mshinde sifa moja ya idadi kubwa ya wateja na jamii.
Bidhaa kuu:
Mashine ya Kuingiza Panasonic, Sehemu za Mashine za Kuingiza Paneli, Mashine ya Kuweka Paneli, Sehemu za Mashine za Kuweka Paneli, Sehemu ya kulisha & Mafunguo ya feeder, Mchanganyiko wa Trolley, SMT Squeegee nk Kujifunza zaidi juu ya bidhaa zetu, tafadhali wasiliana nasi kupitia anwani ya barua pepe ifuatayo. ushirikiano wako!

Jamii za Bidhaa : Mashine ya Kuingiza Panasonic

Barua pepe kwa muuzaji huyu
  • Mr. Nicolas
  • Ujumbe wako lazima uwe kati ya herufi 20-8000

Orodha ya Bidhaa zinazohusiana

Nyumbani

Phone

Skype

Uchunguzi