Fesoʻotaʻi ma le Faʻatonu? Faletupe
Nicolas Mr. Nicolas
O le a se mea e mafai ona ou faia mo oe?
Faʻafesoʻotaʻi Fesoʻotaʻiga
 Tel:86-0755-13828824221 Imeli:1650259446@qq.com
Home > Faʻatau > Panasonic Insertion Machine > Panasonic Axial Lead Component Insertion Machine AV131
Panasonic Axial Lead Component Insertion Machine AV131
  • Panasonic Axial Lead Component Insertion Machine AV131

Panasonic Axial Lead Component Insertion Machine AV131

    Totogi totogi: T/T
    Incoterm: FOB,CIF,EXW
    Min. Poloaiga: 1 Bag/Bags
    Taimi o Taimi: 7 Aso

Faʻamatalaga Autu

Faataʻitaʻiga No.: NM-EJA2A, NM-EJ3A

Additional Info

Faʻapaʻu: Faʻapena avanoa i laupapa

Faailoga: Panasonic

Felauaiga: Ocean

Nofoaga o le Amataga: Iapani

Port: Hong Kong

Faamatalaga o oloa

O le AV131 o se masini tuʻufaʻatasia a le Vial axial lead insert e ono mafai ona vave faʻapipiʻi vave i le taimi o le 0.12 s / vaega, e maua ai le tamaoaiga maualuga. Faʻatasi ai ma le faʻaaogaina o fafaga eletise lea e mafai ai le tele o mea e gaosia (120 inisiua) ma le lua tuʻuina atu iunite e faʻaleleia ai le faʻatinoina o le faʻatinoga, o le AV131 o loʻo folafola mai e tele le saofaga i le faʻaauau pea o le faʻaaogaina o le galuega. E le gata i lea, o le avanoa e mafai ai ona tuʻuina i luga ole uaea e mafai ai ona faʻaogaina ni laina vavave e aunoa ma le manaʻomia mo le tapunia, lea e le gata ina faʻaumatia ai otaota ae ia mautinoa foi le lelei ma le faʻaleleia o gaosiga.

Faʻapitoa

Maualuga Gaoioiga

Faaofi Tao Tact

O le faʻateleina o le saoasaoa i le 0.12 s / vaega e faʻaleleia atili ai le gaosiga.

Tausaga eletise XY maualuga

Polokalame mama ma maualuga

maualuga le saoasaoa XY laulau.

Faaofiina Taimi Taimi mo Taʻitaʻi Fa

(0, 90, 180 ma le 270 tikeri)

Faʻatulagaina faʻamalosi ma le mama ma le tulei saʻo

faiga faʻapipiʻiina o se uila eletise e ofoina atu le televave

faʻaofiina aʻo tuʻuina le vaega faʻapipiʻi e sui.

Lua Nofoaga Faʻasese Tuufaatasi (NM-EJA3A)

O le vaega ole vaega ole vaega ole vaeluaina ile lua laulau e mafai ai ona filifilia le tulaga o le faʻatinoina o galuega e tusa ai

o le gaosiga manaʻomia, ma faʻaleleia ai le faʻatinoga o le faʻatinoga (5 fausaga o loo avanoa.)

Random-Access System

O le faʻaogaina o le faʻaogaina o mea sese e mafai ai ona vave maua mai mea sese e ala i le faʻaaogaina o le kī.

Malosiaga Maualuluga

Vaevaega Faʻatau Mea Faʻatau

O se mea e mafai ona faʻaaogaina

taʻutaʻu taʻitaʻia taʻitaʻia (faʻaputu i le itu)

ofo atu se ola umi o nei mea

vaega faʻatau.

Le faʻataʻitaʻiga ma le pisa

faia mai meafaitino o le gaosimea

mautinoa le ola umi o latou.

Circular Arc Flat Cable

O le ulu ma le iunite o le faʻavasegaina o le talipupuni o loʻo faʻaaogaina le alalaupapa laugatasi vaʻaia e ofoina atu se olaga umi mo le faʻaogaina i totonu

le vaega e mafai ona feaveaʻi.

Faʻasalalau Fonotaga

O le faʻatotonugalemu o galuega mo le faasaʻoina o vaega-e taulai i luga o le lipine e taofia ai le faalavelave

i le va o vaega ma le pusa faʻapipiʻi, ma maua ai le faʻamautuina lelei.

Tatalaina le Tape Cutup Unit

O le mea na gaosia ai le faʻamaʻiina o le faʻamaʻi o le 2.5 mm (stroke) (5 mm i mea uma) faʻaitiitia le faʻaleagaina o le

O le mea lea o le a maua ai i totonu.

Tausaga Faaleaoaoga a le Vaega Atoatoa e Avea ma Tulaga Faataatia

E iloa uma lua pupu i le tulaga faʻaofiina e fai ai se faʻasalalauga sili ona lelei mo le faʻasao

faʻaofi.

E le gata i lea, o le faasaʻoina o mea sese ma le faʻaogaina ole pitch e mafai foi ona saʻo lelei

positioning (XY, θ ma le W), e ofoina atu le maualuga o le faʻaofiina.


Power supply  Rated voltage         3-phase 200 / 220 / 380 / 400 / 420 /
                                   480 V selectable
 Frequency               50 / 60Hz
 Rated capacity       Approx. 4kVA
Air supply  Service air pressure       0.5 MPa
 Air consumption              Approx. 150 L/min. (A.N.R)
Note: Quick coupler attached (SMC KK13P-03M, KK13S-03F).
Dimensions  NM-EJA3A             W4070 × D1910 × H1610 mm
                                  (Not including signal tower)
 NM-EJA2A             W2810 × D1910 × H1610 mm
                                  (Not including signal tower)
Mass  NM-EJA3A          Approx. 2,520 kg  (main body only)
 NM-EJA2A          Approx. 1,750 kg  (main body only)
Environmental requirements  Ambient  temperature      20°C ± 10°C
 Humidity                           25 ~ 75%RH (with no condensation)
 Height above sea level    1,000 m or below
Transport and storage  Ambient temperature -20 ~ 60°C
 Humidity 75%RH or less (with no condensation)
Operating controls  Interactive operation via color LCD touch screen
   (Front and Rear: Standard equipment)
   English/Japanese/Chinese selectable with a single button
   Recognition  screen (displays the recognized board image
    on a superimposed window)
    Hierarchical menu (Operator/Engineer)
 I /O functions         3.5-inch FDD and SDD (standard equipment)
 Communication    RS-232C
Coating color  Standard color      White: W-13 (G50)
Insertion tact time  Max. tact time: 0.12 s/point
Max. tact time conditions by component type and insertion direction
                            Applicable
                           component
Insertion
direction

       Axial lead 

     component

         Jumper wire
                    X (0°) 0.15 s/point         0.12 s/point
                  Y (90°) 0.12 s/point         0.15 s/point
               -X (180°) 0.15 s/point                  -
              -Y (270°) 0.24 s/point                  -
Other conditions for max. tact time (0.12 s/point)
 X-Y table movement
   Within 35 mm for X and 39.5 mm for Y (When interlock 2 is selected)
   (However, within 30 mm for X and 34 mm for Y when there are
   components above 3 mm high on the PCB. (When interlock 1 is
   selected))
 Feeder movement
   None
   (When the feeder moves by 1 pitch, the tact time will be 0.14 s/point.)
Pitch changeover  5.3 mm within the tact time (0.12 s/point)
Applicable components  Taped axial lead components
  (carbon resistor, cylindrical ceramic capacitor, solid resistor, diode and
   taped jumper wire)
 Jumper wire (optional)
   Refer to `Insertion Component Specifications` in this section for
   component dimensions.
Component packaging  Flat pack
PCB replacement time  Approx. 2 s (Ambient temperature: 20°C)
Applicable PCB  Dimensions
  Min. 50 × 50 mm to Max. 508 × 381 mm
  Width-to-length ratio: Width should be equal to or less than length.
  Consult us for boards having width longer than length.
 Allowable insertion area
  Min. 50 × 40 mm to Max. 508 × 371 mm
 Thickness
    1.6 ± 0.15 mm (for standard specification)
    *1 Although boards of thicknesses from 0.6 mm (min.) to 2.0 mm (max.)
      are applicable, changes to the transfer rail (option) are required
      if outside the above standard range.
    *2 Even if the board thickness is within the above range, clinched
      angle of the inserted lead or lead length may vary, or board
      transfer error may occur depending on the shapes of board or
      insertion holes. So it is recommended to perform an advance 
      evaluation.
 Mass
    Max. 1 kg per board including inserted components.
 Flow direction
    Right to left (Standard) or Left to right (option)
 Board positioning method
    Pin positioning (Standard, without positioning in the Y direction),
    Edge positioning (Option, with positioning in the Y direction)
* Contact us for the board positioning in the Y direction.
Insertion pitch  5 ~ 26 mm (can be set in 0.01 mm increments)
(Jumper wire: 5 to 26 mm (Option))
Insertion direction  4 directions (X, Y, -X and -Y)
Anvil  Cutting & Clinch type system (Piezoelectric detection system
No. of component inputs NM-EJA3A
1. Taping width: 26 mm
120 inputs (60 + 60) + drum type jumper wire (Option)
2. Taping width 52mm (Pack width Max. 80)
120 inputs (60 + 60) + drum type jumper wire (Option)
3. Mixed loading of 26 mm and 52 mm tapes is available. NM-EJA2A
1. Taping width 26 mm
60 inputs + drum type jumper wire (Option)
2. Taping width 52 mm (Pack width Max. 80) 60 inputs + drum type jumper wire (Option)
3. Mixed loading of 26 mm and 52 mm tapes is available.
Insertion height  Insertion height programmable according to the component diameter
and lead diameter.
Clinching angle  15°to 30° inner clinching
Clinching length

 1.5 ± 0.3 mm (Reference size: 1.5 mm)*

                 AV131 1

    *The above numerical range indicates the variation which arises due to
     differences in the diameter or material of inserted component leads           and in the diameter of holes of PCBs.
    *When changing the clinching length (changing reference size), the             anvil unit parts need to be replaced. (Individually supported)
    =REMARKS=
     1. A clinch mark will be left after cutting or clinching.
         The shape of clinch mark varies with the lead diameter or material             of  the inserted component.

     2. Clinched component will be tilted a maximum of ±10° in the 

      horizontal  direction due to the hole diameter of PCB or accuracy of

      hole position.

                                 AV131 2

Av131

Shenzhen Keith Electronic Equipment Co., Ltd. "o loo i le Itumalo Baoan, Shenzhen. O se tagata e tuuina atu meafaigaluega a le AI ma le SMT, vaega o mea e faaaoga ai, mea taumafa ma punaoa taumafa o mea taumafa i China. I le gasologa o tausaga, ua matou saunia meafaigaluega ma vaega mo mea o le au faipisinisi e mautinoa le maualuga o le auaunaga. Ma mo le auina ese atu o maketi, tatou te naunau e atiaʻe Europa, Amerika i Matu, Amerika i Saute, Asia i Saute, Initia ma le mea e manaʻomia ai SMT mea faigaluega.
Faigamalo faapisinisi: felagolagomai, manumalo-win, innovation, fesoasoani felagolagomaʻi
O loʻo matou faʻaauau pea le manatu o le "taulaʻi atu i le lelei o oloa ma manaoga o tagata o loʻo manaʻomia", e ala i le faʻatinoina o le faʻafouina fou, lelei le faʻatinoga o faʻatinoga, atinaeina o tagata soifua ma isi taʻiala, e faʻamautu ai le tauvaga o le kamupani, fatuina le tagata faatau ma faʻatauaina lautele, ma manumalo i le autasi o le tele o tagata faʻatau ma sosaiete.
Mea autu:
Panasonic Insertion Machine, Panasonic Insertion Machine Parts, Panasonic Placement Machine, Pipa Panasonic Placement Machine, Panasonic Feeder & Feeder Parts, Feeder Trolley, SMT Cutter ma isi. Ina ia aoao atili e uiga ia tatou oloa, faʻamolemole faʻafesoʻotaʻi mai i matou i le tuatusi imeli o loʻo i lalo, faʻamoemoe lau fesoʻotaʻiga!

Vaega Faʻatino : Panasonic Insertion Machine

Imeli i lenei tagata faʻasoa
  • Mr. Nicolas
  • O lau savali e tatau ona i ai i le va o le 20-8000 tagata

Lisi o Mea e Faatatau Iloa

Aiga

Phone

Skype

Suesuega