Maintenance method of the placement machine nozzle

The placement efficiency of the placement machine has a great relationship with the nozzle of the placement machine. If the nozzle is not good or the maintenance of the nozzle of the placement machine is not in place, the placement machine will cause serious throwing and the nozzle of the placement machine will not suck. The phenomenon of living materials appears, which is very effective in the placement efficiency of the placement machine. Therefore, the maintenance work of the placement machine nozzle is very important.

First, the placement machine nozzle maintenance cleaning method
Examination
1.The terminal of the nozzle has deformation or partial wear due to impact, and it is confirmed that there is foreign matter jam inside the nozzle.
2.If you press the nozzle by hand, it feels very tight.
Measure
1.Inject the special cleaning solution or alcohol into the nozzle hole and blow it off with an air gun. Dip a proper amount of cleaning solution with a rag to clean the foreign objects around the nozzle.
2.Refer to the figure to add cleaning fluid and lubricating oil.
Second, the placement machine nozzle maintenance steps
1.The surface of the nozzle is cleaned with dust cloth.
2.The small-aperture nozzle can be blown with a thin steel wire and then blown with a steam gun.
3.The surface of the nozzle cannot be soaked with corrosive solution such as alcohol, otherwise the surface will fall off.
4. wipe the cavity with a cotton swab, do not smash the filter
5.minions regularly add special grease
6. according to the production of regular maintenance, usually do other maintenance