Sazināties ar piegādātāju? Piegādātājs
Nicolas Mr. Nicolas
Ko es varu tev darīt?
Sazinieties ar piegādātāju
 Tālr:86-0755-13828824221 E-pasts:1650259446@qq.com
Home > Produkti > Panasonic ievietošanas mašīna > Panasonic komponentu ievietošanas mašīna JVK3

Panasonic komponentu ievietošanas mašīna JVK3

    Maksājuma veids: T/T
    Incoterm: FOB,CIF,EXW
    Min. Pasūtījums: 1 Bag/Bags
    Piegādes laiks: 7 Dienas

Pamatinformācija

Modelis Nr.: NM-J10

Additional Info

Iepakojums: Vakuuma iesaiņošana koka kārbās

Zīmols: Panasonic

Transports: Ocean

Izcelsmes vieta: Japāna

Osta: Hong Kong

Produkta apraksts



Parameter

Input range / Standard Setting

Details

STEP No.

1 to 5000

STEP No. 1 to 5000 ID numbers used to distinguish steps of the NC program.

X(ABS)                   Y(ABS)

X: -9999.99 to 9999.99 (mm)                                                    Y: -9999.99 to 9999.99 (mm)

ABS: Part insertion position based on the PCB origin (X-Y coordinatesorigin).

Z No.

Fixed at 121.

 

ROT

0 = 0°, 1 = 90°

Angle of part when inserted on PCB.

INSERT WIDTH

0 to 999.99 (mm)

Pitch data of parts to be inserted     

Standard setting is 5 to 31 mm.

TACT

Not used

Not used for JVK3.

NO INS

0 = Insertion                                                                             

1 = No insertion

Codes that designate whether part insertion is executed or not.

S&R

0 = Normal (No repeat)                                                           

1 = Step repeat / No rotation                                              

2 = Pattern repeat / No rotation                                 

11 = Step repeat / 90° rotation                                   

12 = Pattern repeat / 90° rotation                                

21 = Step repeat / 180° rotation                                

22 = Pattern repeat / 180° rotation                             

31 = Step repeat / 270° rotation                                

32 = Pattern repeat / 270° rotation

Codes that designate step repeat or pattern repeat and rotation insertion angle.

SKIP STEP

0 to 9

Designates step to be skipped.

RECOG

0 = Without hole recognition                                        

1 = With hole recognition

Codes that designate whether or not to correct the given hole position (correct the step)

BAD MARK

0 = Without bad mark recognition                              

1 = With bad mark recognition

Codes that designate whether bad mark detection is executed with the bad mark detection sensor.

FIX

Not used

Not used for JVK3.

COMMENT

Within 8 alphanumeric characters

Any user-set comment for the insertion position (step). (Can be omitted.)

Program offset

X: -999.99 to 999.99 (mm)                                            

Y: -999.99 to 999.99 (mm)

The difference between the coordinate origin on the PCB and mechanical origin of the machine.

Produktu kategorijas : Panasonic ievietošanas mašīna

Nosūtīt šo piegādātāju
  • Mr. Nicolas
  • Jūsu ziņojumam jābūt no 20 līdz 800 rakstzīmēm

Saistīto produktu saraksts

Mājas

Phone

Skype

Izmeklēšana