Cuir conaltradh ris an t-solaraiche? Solaraiche
Nicolas Mr. Nicolas
Dè as urrainn dhomh a dhèanamh dhutse?
Cuir fios gu an t-solaraiche
 Fòn:86-0755-13828824221 Post-d:1650259446@qq.com
Home > Products > Inneal cuir a-steach Panasonic > Inneal cuir a-steach luaidhe rèididheachd Panasonic RL132
Inneal cuir a-steach luaidhe rèididheachd Panasonic RL132
  • Inneal cuir a-steach luaidhe rèididheachd Panasonic RL132

Inneal cuir a-steach luaidhe rèididheachd Panasonic RL132

    Seòrsa Pàighidh: T/T
    Incoterm: FOB,CFR,EXW
    Min. Òrdugh: 1 Bag/Bags
    Am Lìbhrigidh: 7 Làithean

Fiosrachadh bunaiteach

Modal Àir.: NM-EJR5A, NM-EJR6A

Additional Info

Pacadh: Pacadh falamh ann an cùisean fiodha

Brand: Panasonic

Còmhdhail: Ocean

Àite Tùs: Iapan

Port: Hong Kong

Tuairisgeul an toraidh

Feartan

Tha an RL132 na inneal cuir a-steach radial le siostam prìne stiùiridh a tha comasach air cuir a-steach aig astar àrd aig àm tact de 0.14 s / co-phàirt,

a tha cuideachd a ’sàbhaladh lùth agus fuaim obrach nas lugha.
Cuir a-steach 1.High-speed agus Àrd-dùmhlachd
Tha cuir a-steach àrd-astar aig an àm tact as àirde de 0.14 s / co-phàirt a ’ceadachadh cuir a-steach dùmhlachd nas àirde.
Ìre Obrachaidh 2.Improved
• Bidh an inneal-beathachaidh pàirtean stèidhichte a ’toirt seachad pàirtean gun stad air an inneal a leigeas le obrachadh nas fhaide.
• Bidh gnìomh faighinn seachad air solar fèin-ghluasadach agus na feartan prògramaidh cuideachd a ’cur ri obrachadh nas fhaide san inneal.
Earbsachd 3.Higher
Tha suidheachadh cuir a-steach air a cheartachadh stèidhichte air an fhrith-thionndadh a gheibhear tro aithneachadh lèirsinneach de thuill cuir a-steach air bòrd PC, a ’dèanamh cinnteach gu bheil cuir a-steach fìor earbsach.


Sònrachaidhean inneal

Model ID RL132
Model No. NM-EJR5A NM-EJR6A
PCB dimensions (mm) L 50 x W 50 to L 508 x W 381
Max.speed 0.14 s/component
No.of component inputs 40 80 (Connection mode), 40 + 40 (Exchange mode)
Applicable components Pitch 2.5/5.0 mm (standard), 7.5 mm and 10 mm (option),
Resistor, Electrolytic capacitor, Ceramic capacitor, LED, Transistor, Filter, Resistor network
PCB exchange time about 2 s to about 4 s (Room temperature 20 °C)
Insertion direction 360°direction by 1°increment

Electric source *1

3-phase AC 200 V, 3.5 kVA
Pneumatic source 0.5 MPa, 80 L/min (A.N.R.)
Dimensions (mm) W 2 104 x D 2 183 x H 1 575 *2 W 3 200 x D 2 417 x H 1 575 *2

Mass *3

1750 kg   2350 kg



            Item                                                    Details
Power supply  Rated voltage        3-phase 200 / 220 V ± 10 V selectable
                              380 / 400 / 420 / 480 V ±20 V selectable
 Frequency             50 / 60 Hz
 Rated capacity       Approx. 3.5kVA
Air supply  Supplied air pressure      Min. 0.45 MPa to Max. 0.8 MPa
                                      (Operation air pressure: 0.45 ~ 0.5 MPa)
 Supplied air mass           Approx. 80 L / min. (A.N.R)
Note: Quick coupler attached (SMC KK13P-03M, KK13S-03F).
Dimensions  NM-EJR5A         W2,104 x D2,183 x H1,575 mm
                              (Not including signal tower)
 NM-EJR6A        W3,200 x D2,417 x H1,575 mm
                              (Not including signal tower)
Mass  NM-EJR5A        Approx. 1,750 kg (main body only)
 NM-EJR6A        Approx. 2,350 kg (main body only)
Environmental requirements  Ambient temperature       20°C ± 10°C
Operating controls  Interactive operation via color LCD touch screen
    English/Japanese/Chinese selectable with a single button Recognition screen
    (displays the recognized board image on a superimposed window)
    Hierarchical menu (Operator/Engineer)
 I /O functions        SD card slot
                              (standard equipment)
 Communication      LAN comunicaton (TCP/IP)
Coating color  Standard color    White: W-13 (G50)

Coileanadh Bunasach

                              Item                                                                            Details
Insertion tact time  • Max. tact time: Approx. 0.14 s/point (0.17, 0.20, 0.25, 0.3 s/point  changeable)
 =REMARKS=

 *1 X-Y table movement at the tact time of 0.14 s/point: Within 36 mm Insertion       

      direction: each 1degree (0°- 90°, 0°- (-)90° : 0.14 s/point)

                                             (90°- 180°,91°- (-)180°: 0.20 s/point)

 *2 The tact time above is enabled only when components are continuousl              

      taped.  (Tact time varies if there are missing portions.)

 *3 Tact time varies between the beginning and the last of the insertion.
 *4 Tact time varies when new components are inserted for recovery.

 *5 Tact time varies also if 10 or more feeders are operated at a time due to the        

      NC data setting.

 *6 Tact time must be set between 0.25 and 0.30 s when inserting components        

      more than 12 mm in diameter or more than 18 mm in height

Applicable components

 Insertion pitch: 2.5 and 5.0 mm (standard), 7.5 and 10.0 mm (option)

 Height: Hn = Max. 23 mm

 Diameter: D = Max. 13 mm
 Resistors, electrolytic capacitors, ceramic capacitors, LEDs, transistors, filters   and resistor networks
Component packaging  • Taping (in pack or reel)
 =REMARKS=

 Component pack must be lower than 360 mm and width less than 62 mm.

 Component reel must be up to 360 mm in diameter and 62 mm in width.

 Bracket and reel shaft are required. Cannot be used on the upper stage of the   supply unit.
PCB replacement time  • Approx. 2 second (Ambient temperature: 20°C):
 =REMARKS=
 PCB replacement time only includes time for loading. It takes approx. 4 to 5   seconds including the table return time.
Applicable PCB  • Dimensions
   Min. 50 x 50 mm to Max. 508 x 381 mm

   Width-to-length ratio: Width should be equal to or less than length. 

   Consult us for boards having width longer than length.

 • Allowable insertion area
   Min. 50 x 40 mm ~ Max. 508 x 371 mm
 • Thickness
   1.6 mm ± 0.15 mm (for standard specification)
 =REMARKS=

 Boards of thickness from 0.6 mm (min.) to 2.0 mm (max.) are applicable. 

 Even if the board thickness is within the above range, clinched angle of 

 the  inserted lead or lead length may vary, or board transfer error may 

 occur depending on the shapes of board or insertion holes. Please contact 

 us in advance.


 • Mass
    Max. 1 kg per board including inserted components.
 • Flow direction
    Right to left (Standard) or Left to right (Option)
 • Board positioning method
    Pin positioning (Standard, without positioning in the Y direction),
 =REMARKS=
    Contact us separately for edge positioning.
Insertion pitch  • 2-pitch (standard), 3-pitch or 4-pitch (option)
   2.5 mm and 5.0 mm (standard),
   2.5 mm ,5.0 mm ,7.5 mm ,or 2.5 mm ,5.0 mm ,7.5 mm,10.0 mm (Option)
Insertion direction  • 360 degrees by 1 degree
Anvil  • Cutting & Clinch type system (Piezoelectric detection system)
No. of component inputs  • NM-EJR5A   40 types
 • NM-EJR6A   80 types

Sònrachaidhean Smachd

                            Item                                                         Details
Control system    Microcomputer system
Programming method    X-Y axes: Absolute coordinate commands
   Insertion pitch: Absolute commands
   Component feeder: Feeder number designation
Least command increment of X-Y table    0.01 mm / pulse
Program    Number of NC programs
   Built-in flash memory        200 programs, 5000 steps / program
    (Note: In case of programs involving pattern repeat, the total number
     of steps after expanding the program must be less than 5,000.)
   SD card                             Depends on the card capacity. (up to 2 GB)
Indication light    Signal tower (3 lamps, top to bottom: red/yellow/green)
Hole position offset    Determines optimum insertion positions based on the recognition of all
     insertion positions to make positional corrections (XY and q).
Self-diagnosis function    Presents on the color LCD the machine status when the power is ON and    
     situation of any troubles occurred, as well as countermeasures against the
     troubles.
Others    Programming functions Pana
    PRO J
    PanaPROJ the software for optimizing the balance of line consisting of
    multiple machines and for assigning data is available.
   Data compatibility

    Data from conventional RH series (RH, RH6, RHP, RHP2, RH2, RH3, RH5, RHSG, RHS, 

    RHS2, RHS2B, RHU, RHU2, RHUP, RG131 and RL131) can be directly used on the RL132.


= MOLAIDHEAN =

Wh en resta rting the machine after a long stop, dèan cinnteach nach eil dad ceàrr air obair an inneil ann am modh Stiùireadh agus idle an inneal.

Rl132 2

Shenzhen Keith Electronic Equipment Co., Ltd. "suidhichte ann an Sgìre Baoan, Shenzhen. Tha e na sholaraiche de uidheamachd AI agus SMT, pàirtean a bharrachd, stuthan ithe agus stuthan caitheamh cuideachail ann an Sìona. Thar nam bliadhnaichean, tha sinn air uidheamachd adhartach agus pàirtean a thoirt seachad airson ar luchd-ceannach gus dèanamh cinnteach à seirbheis àrd-inbhe. Agus airson margaidh às-mhalairt, tha sinn an dùil a bhith a ’leasachadh na Roinn Eòrpa, Ameireagadh a Tuath, Ameireaga a-Deas, Ear-dheas Àisia, na h-Innseachan agus far a bheil feum air pàirtean a bharrachd de uidheamachd SMT.
Feallsanachd gnìomhachais: co-obrachadh, buannachadh, ùr-ghnàthachadh, taic dha chèile
Tha sinn air a bhith a ’cumail ris a’ bhun-bheachd riaghlaidh branda de “fòcas air càileachd toraidh agus feumalachdan luchd-cleachdaidh”, tro bhith a ’buileachadh ùr-ghnàthachadh fosgailte, riaghladh obrachaidh sàr-mhath, leasachadh goireasan daonna agus ro-innleachdan eile, gus farpaiseachd bunaiteach a’ chompanaidh a thogail gu coileanta, cruthachadh teachdaiche agus luachan sòisealta, agus a ’cosnadh moladh aona-ghuthach bhon àireamh mhòr de luchd-ceannach agus comann-sòisealta.
Prìomh thoraidhean:
Inneal Cuir a-steach Panasonic, Pàirtean Inneal Cuir a-steach Panasonic, Inneal Suidheachaidh Panasonic, Pàirtean Inneal Greis-gnìomhachais Panasonic, Inneal-beatha Panasonic & Feeder, Trolley Feeder, SMT Cutter msaa. Gus tuilleadh ionnsachadh mu na toraidhean againn, cuir fios thugainn tron ​​t-seòladh post-d a leanas, a ’coimhead air adhart ri do cho-obrachadh!

Roinn-seòrsa bathair : Inneal cuir a-steach Panasonic

Post-d chun na solaraiche seo
  • Mr. Nicolas
  • Feumaidh do theachdaireachd a bhith eadar 20-8000 caractar

Liosta de thoraidhean co-cheangailte

Dachaigh

Phone

Skype

Rannsachadh