Cuir conaltradh ris an t-solaraiche? Solaraiche
Nicolas Mr. Nicolas
Dè as urrainn dhomh a dhèanamh dhutse?
Cuir fios gu an t-solaraiche
 Fòn:86-0755-13828824221 Post-d:1650259446@qq.com
Home > Products > Inneal cuir a-steach Panasonic > Inneal cuir a-steach prìomh phàirt Panasonic RL131
Inneal cuir a-steach prìomh phàirt Panasonic RL131
  • Inneal cuir a-steach prìomh phàirt Panasonic RL131

Inneal cuir a-steach prìomh phàirt Panasonic RL131

    Seòrsa Pàighidh: T/T
    Incoterm: FOB,CIF,EXW
    Min. Òrdugh: 1 Bag/Bags
    Am Lìbhrigidh: 7 Làithean

Fiosrachadh bunaiteach

Modal Àir.: NM-EJR1A, NM-EJR2A

Additional Info

Pacadh: Pacadh falamh ann an cùisean fiodha

Brand: Panasonic

Còmhdhail: Ocean

Àite Tùs: Iapan

Port: Hong Kong

Tuairisgeul an toraidh

Feartan

Tha an RL131 na inneal cuir a-steach radial le siostam prìne stiùiridh a tha comasach air cuir a-steach aig astar àrd aig

ùine tact de 0.17 s / co-phàirt, a tha cuideachd a ’leantainn gu sàbhaladh lùth agus lughdachadh fuaim obrachaidh.

Cuir a-steach àrd-astar agus àrd-dùmhlachd

Tha cuir a-steach àrd-astar aig an àm tact as àirde de 0.17 s / co-phàirt a ’ceadachadh cuir a-steach dùmhlachd nas àirde.

Ìre Obrachaidh nas fheàrr

Bidh an inneal beathachaidh stèidhichte a ’toirt seachad pàirtean gun a bhith a’ stad an inneal a leigeas nas fhaide

obrachadh uair a thìde.

Bidh gnìomh faighinn seachad air solar fèin-ghluasadach agus na feartan prògramaidh cuideachd a ’cur ri obrachadh nas fhaide de uair a thìde de

an inneal.

Earbsachd nas àirde

Tha suidheachadh cuir a-steach air a cheartachadh stèidhichte air a ’chothromachadh a gheibhear tro aithneachadh lèirsinneach de thuill cuir a-steach

Bòrd PC, a ’dèanamh cinnteach gu bheil cuir a-steach fìor earbsach.


Sònrachaidhean inneal

Item

Details

Power supply

= Rated voltage

 

= Frequency

= Rated capacity

3-phase 200 / 220 V ± 10 V selectable

380 / 400 / 420 / 480 V ±20 V selectable

50 / 60 Hz

Approx. 3.5kVA

Air supply

= Supplied air pressure Min. 0.45 MPa to Max. 0.8 MPa

(Operation air pressure: 0.45 ~ 0.5 MPa)

= Supplied air mass Approx. 80 L / min. (A.N.R)

Note: Quick coupler attached (SMC KK13P-03M, KK13S-03F).

Dimensions

= NM-EJR1A

 

= NM-EJR2A

W3,200 ´ D2,417 ´ H1,575 mm

(Not including signal tower) W3,200 ´ D2,417 ´ H1,575 mm

(Not including signal tower)

Mass

= NM-EJR1A

= NM-EJR2A

Approx. 2,250 kg (main body only)

Approx. 2,350 kg (main body only)

Environmental requirements

= Ambient temperature 20°C ± 10°C

Operating controls

= Interactive operation via color LCD touch screen (Front and Rear: Standard equipment)

English/Japanese/Chinese selectable with a single button Recognition screen (displays the recognized board image on a superimposed window)

Hierarchical menu (Operator/Engineer)

= I/O functions 3.5-inch FDD and SD card slot (standard equipment)

= Communication RS-232C

Coating color

= Standard color

White: W-13 (G50)

Bunasach Coileanadh

Item

Details

Insertion tact time

= Max. tact time: Approx. 0.17 s/point (0.20, 0.25, 0.36, 0.45 s/point changeable)

0.25 s/point conditions

=REMARKS=

*1 X-Y table movement at the tact time of 0.17 s/point: Within 35 mm Insertion direction: 0°, 90°, -90° (180°: 0.36 s/point)

*2 The tact time above is enabled only when components are continuously taped. (Tact time varies if there are missing portions.)

*3 Tact time varies between the beginning and the last of the insertion.

*4 Tact time varies when new components are inserted for recovery.

*5 Tact time varies also if 10 or more feeders are operated at a time due to the NC data setting.

*6 Tact time must be set between 0.25 and 0.45 s when inserting components more than 12 mm in diameter or more than 18 mm in height

Applicable components

Insertion pitch: 2.5 and 5.0 mm Height: Hn = Max. 21 mm Diameter: D = Max. 13 mm

Resistors, electrolytic capacitors, ceramic capacitors, LEDs, transistors, filters and resistor networks

Component packaging

= Taping (in pack or reel)

=REMARKS=

Component pack must be lower than 360 mm and width less than 62 mm. Component reel must be up to 360 mm in diameter and 62 mm in width. Bracket and reel shaft are required. Cannot be used on the upper stage of

the supply unit.

PCB replacement time

= Approx. 2 s to 4 s (Ambient temperature: 20°C):

=REMARKS=

PCB replacement time only includes time for loading. It takes approx. 4 to 5 seconds including the table return time.

Applicable PCB

= Demensions

Min. 50 ´ 50 mm to Max. 508 ´ 381 mm

Width-to-length ratio: Width should be equal to or less than length. Consult us for boards having width longer than length.

= Allowable insertion area

Min. 50 ´ 40 mm ~ Max. 508 ´ 371 mm

= Thickness

1.6 mm ± 0.15 mm (for standard specification)

=REMARKS=

Boards of thickness from 0.6 mm (min.) to 2.0 mm (max.) are applicable. Even if the board thickness is within the above range, clinched angle of the inserted lead or lead length may vary, or board transfer error may occur depending on the shapes of board or insertion holes. Please contact us in advance.

 

= Mass

Max. 1 kg per board including inserted components.

= Flow direction

Right to left (Standard) or Left to right

= Board positioning method

Pin positioning (Standard, without positioning in the Y direction),

=REMARKS=

Contact us separately for edge positioning.

Insertion pitch

= 2-pitch specification

2.5 mm and 5.0 mm, or 2.54 mm and 5.08 mm

Insertion direction

= 4 directions (0°, 90°, 180° and -90°)

Anvil

= Cutting & Clinch type system (Piezoelectric detection system)

No. of component inputs

= NM-EJR3A

40 types

= NM-EJR4A

80 types

Rl131 2

Shenzhen Keith Electronic Equipment Co., Ltd. "suidhichte ann an Sgìre Baoan, Shenzhen. Tha e na sholaraiche de uidheamachd AI agus SMT, pàirtean a bharrachd, stuthan ithe agus stuthan caitheamh cuideachail ann an Sìona. Thar nam bliadhnaichean, tha sinn air uidheamachd adhartach agus pàirtean a thoirt seachad airson ar luchd-ceannach gus dèanamh cinnteach à seirbheis àrd-inbhe. Agus airson margaidh às-mhalairt, tha sinn an dùil a bhith a ’leasachadh na Roinn Eòrpa, Ameireagadh a Tuath, Ameireaga a-Deas, Ear-dheas Àisia, na h-Innseachan agus far a bheil feum air pàirtean a bharrachd de uidheamachd SMT.
Feallsanachd gnìomhachais: co-obrachadh, buannachadh, ùr-ghnàthachadh, taic dha chèile
Tha sinn air a bhith a ’cumail ris a’ bhun-bheachd riaghlaidh branda de “fòcas air càileachd toraidh agus feumalachdan luchd-cleachdaidh”, tro bhith a ’buileachadh ùr-ghnàthachadh fosgailte, riaghladh obrachaidh sàr-mhath, leasachadh goireasan daonna agus ro-innleachdan eile, gus farpaiseachd bunaiteach a’ chompanaidh a thogail gu coileanta, cruthachadh teachdaiche agus luachan sòisealta, agus a ’cosnadh moladh aona-ghuthach bhon àireamh mhòr de luchd-ceannach agus comann-sòisealta.
Prìomh thoraidhean:
Inneal Cuir a-steach Panasonic, Pàirtean Inneal Cuir a-steach Panasonic, Inneal Suidheachaidh Panasonic, Pàirtean Inneal Greis-gnìomhachais Panasonic, Feeder Panasonic & Feeder Parts, Feeder Trolley, SMT Squeegee msaa. Gus tuilleadh ionnsachadh mu na toraidhean againn, cuir fios thugainn tron ​​t-seòladh post-d a leanas, a ’coimhead air adhart ri do cho-obrachadh!

Roinn-seòrsa bathair : Inneal cuir a-steach Panasonic

Post-d chun na solaraiche seo
  • Mr. Nicolas
  • Feumaidh do theachdaireachd a bhith eadar 20-8000 caractar

Liosta de thoraidhean co-cheangailte

Dachaigh

Phone

Skype

Rannsachadh